[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/83261fe8-5ec5-42fe-8ef5-4e56d2092abd"]

Class A CDL driver – Springfield

  *** please note job requires 2 years of Class A CDL driving experience and a clean MVR  ***   SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck.  The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard.   DUTIES:

1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations
2. Operate roll-off controls and couple and un-couple roll off boxes.
3. Make pick-ups and deliveries
4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary.
5. Spot roll-off boxes, dumpsters, and trailers
6. Maintains any related paperwork and records
7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management
8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office
9. Assists in the general labor duties where needed

  ESSENTIAL QUALIFICATIONS:

1. CDL class “A” license
2. Clean MVR
3. Must meet the DOT physical and medical requirements & good driving record
4. Unblemished work and attendance record
5. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads
6. The strength and flexibility to lift and move 50 pounds manually

  SPECIFIC SKILLS:

1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements
2. Basic knowledge of the machinery he/she will be using in the yard
3. The ability to follow directions and read maps
4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

  EXPERIENCE NEEDED:

1. A minimum of 2 years of driving experience required

   

[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/00ca1112-bf09-4712-85c4-ee9a2d30dec6"]

Class A CDL driver – Mattoon

  *** please note job requires 2 years of Class A CDL driving experience and a clean MVR  ***   SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck.  The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard.   DUTIES:

1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations
2. Operate roll-off controls and couple and un-couple roll off boxes.
3. Make pick-ups and deliveries
4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary.
5. Spot roll-off boxes, dumpsters, and trailers
6. Maintains any related paperwork and records
7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management
8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office
9. Assists in the general labor duties where needed

  ESSENTIAL QUALIFICATIONS:

1. CDL class “A” license
2. Clean MVR
3. Must meet the DOT physical and medical requirements & good driving record
4. Unblemished work and attendance record
5. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads
6. The strength and flexibility to lift and move 50 pounds manually

  SPECIFIC SKILLS:

1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements
2. Basic knowledge of the machinery he/she will be using in the yard
3. The ability to follow directions and read maps
4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

  EXPERIENCE NEEDED:

1. A minimum of 2 years of driving experience required

   

[maxbutton id="1"]

Welder/Fabricator – Decatur

  SUMMARY DESCRIPTION: The employee in this position must enjoy working with their hands have an eye for detail and an analytical mind. In addition you must be able to use variety of tools and equipment, ability to read blueprints, recognize welding symbols and specifications. You must also prepare, fabricate and weld various constructions, components and structures from patterns and blueprints using a variety of tools and machines to make metal parts or assemble components.   DUTIES: 

1. Be able to read and interpret blueprints and engineering plans
2. Fabricate Metal Objects by laying out, cutting, and fitting, measuring and welding metals to create the desired shape or object.
3. Constantly inspect and test welds and equipment for durability.
4. Perform detailed quality checks to ensure that it meets all standards and requirements. Document work and results, and keep records or labor and materials used.
5. Use a variety of tools to work with metal. Operate cutting saws to cut various metals, and weld and grind and grand fabricated structures to meet structural requirements.
6. 6. Use a shear machine, metal roller, A larger cutter .208 and 480 amp Mig Welder.

    ESSENTIAL QUALIFICATIONS:

1. Ability to understand oral and written instructions of a technical nature.
2. Ability to operate different tools, and to troubleshoot equipment problems
3. Good interpersonal and teamwork skills
4. The endurance to stand for approximately 7.5 hours or more each day
5. The strength and flexibility to lift and move up to 50 pounds manually
6. The ability and willingness to follow directions
7. Reach with hands and arms.
8. Ability to stand, kneel, bend, sit and use stairs or a ladder.

    EXPERIENCE NEEDED:

1. Welding experience or AWS certification
2. Fabrication experience

 

[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/f6fb7112-7990-4e4a-bbf9-3bca3186d2f3"]

Class A CDL driver – Crawfordsville

  SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck. The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard. DUTIES: 1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations 2. Operate roll-off controls and couple and un-couple roll off boxes. 3. Make pick-ups and deliveries 4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary. 5. Spot roll-off boxes, dumpsters, and trailers 6. Maintains any related paperwork and records 7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management 8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office 9. Assists in the general labor duties where needed ESSENTIAL QUALIFICATIONS: 1. CDL class “A” license 2. Must meet the DOT physical and medical requirements & good driving record 3. Unblemished work and attendance record 4. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads 5. The strength and flexibility to lift and move 50 pounds manually SPECIFIC SKILLS: 1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements 2. Basic knowledge of the machinery he/she will be using in the yard 3. The ability to follow directions and read maps 4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

[maxbutton id="1"]

Commercial/Industrial Electrician – Danville IL

  SUMMARY DESCRIPTION: The employee in this position analyzes and corrects problems on electrical equipment and controls. Additionally the employee will make proper electrical installations where they are required. The tasks will require the employee to have the strength and agility to climb ladders as well as reach both high and low locations on equipment for repairs as well as installations. This employee may be part of a mechanical team on major installations, working with other trades such as machinists, pipe fitter, millwright, etc. The employee will report directly to the Maintenance Manager and works closely with all yard managers, maintenance workers, and supervisors. This employee may be called in on night shifts and weekends to do temporary repairs as well as special installations.   DUTIES:

1. Analyze circuits, blueprints and technical drawings.
2. Perform work requiring a thorough knowledge of electrical theory and principles, statutory codes, properties of materials and principles of operation of electrical equipment. Starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown – in line with OSHA requirements.
3. Service electronic equipment by checking, testing, and replacing faulty components, circuits, printed circuit boards, and similar electronic devices.
4. Install, repair, and maintain communication cables, power distribution cables, and splicing pieces as required.
5. Fabricate parts if not commercially available, using machine and hand tools common to the trade.
6. Determine needs, analyzes, and makes necessary running adjustments, repairs and overhauls.
7. Advise and caution operators and mechanics about potential electrical problems and inherent dangers involved.
8. Notify supervisor of potentially dangerous electrical equipment noted and corrective action taken.

    ESSENTIAL QUALIFICATIONS:

1. Drug free
2. Unblemished work and attendance record
3. Ability to work safely/ alone in highly congested areas
4. The strength and dexterity to lift and move 35-50 pounds manually in the maintenance of equipment
5. The agility and flexibility to climb in overhead structures, to work beneath machines and in close quarters performing analysis and repair work.
6. The ability and willingness to follow directions
7. The ability to work together with other employees as a team

    SPECIFIC SKILLS:

1. Vocational school or technical training in electronics or satisfactory completion of in-plant training program.
2. Adequate transportation to remote sites.
3. High degree of precision working with minimum tolerances required.
4. High degree of attention and care required to prevent injury to others when responsible for flow of electrical power

    ESSENTIAL QUALIFICATIONS:

1. 3-5 years of experience in industrial electrical and electronics work

     

[maxbutton id="1"]

Heavy Equipment Mechanic – Crawfordsville IN

  SUMMARY DESCRIPTION: Responsible for maintenance of Hydraulic Cranes, some OTR trucks, roll off containers, electrical systems on all mobile equipment used in the scrap metal recycling yard.  Class B CDL is a plus.   DUTIES:

• Diagnosing, repairing engines, hydraulic systems, electrical, brakes, routine maintenance.
• Replace parts and components when necessary to rebuild units at regular intervals.
• Weld parts as necessary
• Operate the machine’s controls in order to perform the designated task within the machine’s capabilities
• Recognize the machine’s limitations in order to work safely in a large variety of job situations
• Recognize operational control problems and coordinate their repair with outside vendors.
• Train and assist the operators in the routine care of the machines
• Test equipment to check operation

  ESSENTIAL QUALIFICATIONS:

• Ability to work safely alone in highly congested areas
• The ability to use hand tools and trade type tools
• The strength and dexterity to lift and move 50-75 pounds manually in the maintenance of equipment
• The agility and flexibility to climb on the various machine areas to grease and clean the machine components

   

[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/2926430e-01ee-444e-b15c-09942de442a7"]

Class A CDL driver – Terre Haute

  *** please note job requires 2 years of Class A CDL driving experience and a clean MVR  ***   SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck.  The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard.   DUTIES:

1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations
2. Operate roll-off controls and couple and un-couple roll off boxes.
3. Make pick-ups and deliveries
4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary.
5. Spot roll-off boxes, dumpsters, and trailers
6. Maintains any related paperwork and records
7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management
8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office
9. Assists in the general labor duties where needed

  ESSENTIAL QUALIFICATIONS:

1. CDL class “A” license
2. Clean MVR
3. Must meet the DOT physical and medical requirements & good driving record
4. Unblemished work and attendance record
5. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads
6. The strength and flexibility to lift and move 50 pounds manually

  SPECIFIC SKILLS:

1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements
2. Basic knowledge of the machinery he/she will be using in the yard
3. The ability to follow directions and read maps
4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

  EXPERIENCE NEEDED:

1. A minimum of 2 years of driving experience required

   

[maxbutton id="3" url="https://dash.foleyservices.com/ApplyForJob/83261fe8-5ec5-42fe-8ef5-4e56d2092abd"]

Class A CDL driver – Decatur

  *** please note job requires 2 years of Class A CDL driving experience and a clean MVR  ***   SUMMARY DESCRIPTION: The employee in this position must operate a tractor trailer, operate a straight truck, spot roll-off boxes, spot trailers, and perform the daily maintenance that is necessary for the peak performance of the truck.  The position may also require the driver to perform pick-ups as well as deliveries at a variety of locations and assist in the operation of equipment at the yard.   DUTIES:

1. Operate tractor trailer and straight truck, according to state laws and observing all traffic laws and safety regulations
2. Operate roll-off controls and couple and un-couple roll off boxes.
3. Make pick-ups and deliveries
4. Climb loads for inspection of scrap material, and covering loads with a tarps as necessary.
5. Spot roll-off boxes, dumpsters, and trailers
6. Maintains any related paperwork and records
7. Maintain equipment used in the performance of the job and reports any maintenance malfunctions to management
8. Obtains the proper shipping documents with necessary signatures and returns the completed paperwork to the office
9. Assists in the general labor duties where needed

  ESSENTIAL QUALIFICATIONS:

1. CDL class “A” license
2. Clean MVR
3. Must meet the DOT physical and medical requirements & good driving record
4. Unblemished work and attendance record
5. The agility to climb on and off trucks for the loading of materials, hooking and unhooking air controls and tarping loads
6. The strength and flexibility to lift and move 50 pounds manually

  SPECIFIC SKILLS:

1. Basic knowledge of the vehicle he/she is to drive and the daily maintenance requirements
2. Basic knowledge of the machinery he/she will be using in the yard
3. The ability to follow directions and read maps
4. A knowledge of the weight and load restrictions for the roll-off boxes, dumpsters, and trailers that will be pulled

  EXPERIENCE NEEDED:

1. A minimum of 2 years of driving experience required

   

[maxbutton id="1"]

Heavy Equipment Mechanic – Decatur IL

  SUMMARY DESCRIPTION: Responsible for maintenance of Hydraulic Cranes, some OTR trucks, roll off containers, electrical systems on all mobile equipment used in the scrap metal recycling yard.  Class B CDL is a plus.   DUTIES:

• Diagnosing, repairing engines, hydraulic systems, electrical, brakes, routine maintenance.
• Replace parts and components when necessary to rebuild units at regular intervals.
• Weld parts as necessary
• Operate the machine’s controls in order to perform the designated task within the machine’s capabilities
• Recognize the machine’s limitations in order to work safely in a large variety of job situations
• Recognize operational control problems and coordinate their repair with outside vendors.
• Train and assist the operators in the routine care of the machines
• Test equipment to check operation

  ESSENTIAL QUALIFICATIONS:

• Ability to work safely alone in highly congested areas
• The ability to use hand tools and trade type tools
• The strength and dexterity to lift and move 50-75 pounds manually in the maintenance of equipment
• The agility and flexibility to climb on the various machine areas to grease and clean the machine components

   

[maxbutton id="1"]

Mechanic – Decatur IL

  SUMMARY DESCRIPTION: Responsible for maintenance of Hydraulic Cranes, some OTR trucks, roll off containers, electrical systems on all mobile equipment used in the scrap metal recycling yard.  Class B CDL is a plus.   DUTIES:

• Diagnosing, repairing engines, hydraulic systems, electrical, brakes, routine maintenance.
• Replace parts and components when necessary to rebuild units at regular intervals.
• Weld parts as necessary
• Operate the machine’s controls in order to perform the designated task within the machine’s capabilities
• Recognize the machine’s limitations in order to work safely in a large variety of job situations
• Recognize operational control problems and coordinate their repair with outside vendors.
• Train and assist the operators in the routine care of the machines
• Test equipment to check operation

  ESSENTIAL QUALIFICATIONS:

• Ability to work safely alone in highly congested areas
• The ability to use hand tools and trade type tools
• The strength and dexterity to lift and move 50-75 pounds manually in the maintenance of equipment
• The agility and flexibility to climb on the various machine areas to grease and clean the machine components